Installation Procedure
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the window through the opening of the window frame into position into the window clamps (1).
- Install the outer window belt sealing strip. Refer to Front Side Door Window Outer Sealing Strip Replacement .
- Install the water deflector. Refer to Front Side Door Water Deflector Replacement
.
Tighten: Tighten the clamps to 9 N.m (6 lb ft).
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Operate the window to ensure proper operation.
NOTE:
Refer to Fastener Notice
.