Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Left Rear Window | Miscellaneous Test | The BCM will control the left window up when you select Up. The BCM will control the left window down when you select Down. |
| Right Rear Window | Miscellaneous Test | The BCM will control the right window up when you select Up. The BCM will control the right window down when you select Down. |
| Rear Defogger | Output Control | The BCM actuates the rear window defogger relay when you select ON. The rear window defogger grid should become warm. |
Driver Door Module and Passenger Door Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Window Up/Down | Output Control | The DDM or PDM will command the window up and down |
| Passenger Window Lockout Indicator | Output Control | The DDM will command the window lockout indicator on when you select ON and turn it off when you select OFF |