LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Suspension General Diagnosis) >> Diagnostic Information and Procedures >> Trim Height Inspection >> Z Height Adjustment

Z Height Adjustment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Torsion Bar Suspension Adjuster Bolt
    GM2064336Courtesy of GENERAL MOTORS CORP.
  1. For vehicles equipped with a torsion bar suspension, turn the bolt (1) that contacts the torsion arm as needed.
  2. For vehicles without torsion bars, replace worn or damaged components as necessary.