Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to FASTENER NOTICE .

Fig 1: Locating Rear Axle Drain Plug

Courtesy of GENERAL MOTORS CORP.

Install the rear axle drain plug.
Tighten: Tighten the rear axle drain plug to 33 N.m (24 lb ft).
Fill the rear axle. Use the proper fluid. Refer to Approximate Fluid Capacities and Fluid and Lubricant Recommendations .

Fig 2: View Of Rear Axle Fill Plug

Courtesy of GENERAL MOTORS CORP.

Install the rear axle fill plug.
Tighten: Tighten the rear axle fill plug to 33 N.m (24 lb ft).
Lower the vehicle.