Locking Differential Clutch Disc Assembly Assemble (10.5 Inch Axle)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Locking Differential Clutch Disc Assembly (10.5 Inch Axle)

Courtesy of GENERAL MOTORS CORP.

Apply axle lubricant, GM P/N 12378261 (Canadian P/N 10953455) or equivalent meeting GM Specification 9986115, to the surface of each disc.
Assemble the left side clutch disc assembly as follows:
1. Install the 1st non-carbon eared disc (2) to the side gear (1).
2. Install the 1st splined disc (3).
3. Install the 2nd non-carbon eared disc (4).
4. Install the 2nd splined disc (5).
5. Install the 3rd non-carbon eared disc (7).
6. Align the ears of all the clutch discs.
7. Install the guide clips (6) to the clutch discs (2-5, 7).
  Apply chassis grease, GM P/N 12377985 (Canadian P/N 88901242) or equivalent, to the guide clips in order to hold the clips in place on the disc ears.