Locking Differential Cam Unit Disassemble (8.6 Inch Axle)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Remove the guide clips.

Fig 1: View Of Retaining Ring

Courtesy of GENERAL MOTORS CORP.

Remove the retaining ring.

Fig 2: Exploded View Of Locking Differential Side Gear Cam Unit & Clutch Disc Assembly

Courtesy of GENERAL MOTORS CORP.

Disassemble the locking differential side gear cam unit and clutch disc assembly as follows:
1. Remove the clutch discs and the splined discs (7-14).
2. Remove the wave washer (5).
3. Remove the fuse disc (4).
4. Remove the carbon eared disc (3).
5. Disassemble the cam plate (2) from the cam side gear (1).