Drive Pinion Bearings Replacement (8.6 Inch Axle): Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
- DT-47688 Pinion Bearing Remover, 8.6 Inch Axle Installer
- J 8092 Universal Driver Handle - 3/4 in - 10
- J 8611-01 Rear Pinion Bearing Race Installer. See Special Tools .
- J 8614-01 Flange and Pulley Holding Tool
- J 22828 Input/Counterbalance Race Installer
- J 22912-B Split Plate Bearing Puller
- J 36614 Inner Pinion Bearing Installer
- J 45870 Pinion Bearing Cup Installer