LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Hybrid Engine Electrical System) >> Repair Instructions >> Battery Negative Cable Disconnection & Connection >> Connect Procedure

Connect Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Clean any existing corrosion from the battery terminal and the battery cable.
    Fig 1: Locating Battery Components
    GM1968005Courtesy of GENERAL MOTORS CORP.
  1. Install the negative battery cable (6) to the battery.
  2. Rotate the lever lock (4) clockwise until an audible click is heard in order to connect the negative battery cable to the battery.
  3. Position the negative battery cable insulating cover (5) over the negative terminal.
scientia non olet · About LEMON Manuals