Circuit/System Verification
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- Engine running, accessories OFF, measure and record the battery voltage at the 12V battery terminals. The voltage should be between 12.6-15.0 volts.
- If not within the specified range, refer to Charging System Test .
- Observe the scan tool EBCM Battery Voltage parameter. The reading should be between 12.6-15.0 volts.
- If greater than the specified range, replace the EBCM.