LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Hybrid Engine Electrical System) >> Diagnostic Information & Procedures >> DTC C0895 (ESC) >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal - ESC Module

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, Engine OFF.
Parameter Normal Value:  12.6 Volts
12V B+ 0.0 Volts* 0.0 Volts* 12.6 Volts
*The scan tool will not communicate with the ESC module if there is 0 Volts on the circuit.