LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Hybrid Engine Electrical System) >> Diagnostic Information & Procedures >> DTC C0800 >> Diagnostic Fault Information >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

The power steering control module (PSCM) monitors the 12V system voltage to make sure that the voltage stays within the proper range. Damage to components, and incorrect data input can occur when the voltage is out of range. The PSCM monitors the system voltage. If the PSCM detects a 12V system voltage outside an expected range, DTC C0800 will set.

scientia non olet · About LEMON Manuals