Charge Indicator Operation: Notes
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
The instrument panel cluster (IPC) illuminates the charge indicator and displays a warning message in the driver information center (DIC) when the one or more of the following occurs:
- The engine control module (ECM) detects system voltage less than 11 volts or greater than 16 volts. The IPC receives a GMLAN message from the ECM requesting illumination.
- The BCM determines that the system voltage is less than 11 volts or greater than 16 volts.
- The IPC receives a GMLAN message from the body control module (BCM) indicating there is a system voltage range concern.
- The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
- The ignition is ON, with the engine OFF.