LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Hydraulic Brake System) >> Repair Instructions >> Vacuum Brake Booster Check Valve and/or Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Vacuum Brake Booster Hose
    GM1697051Courtesy of GENERAL MOTORS CORP.
  1. Connect the vacuum brake booster hose at the engine.
  2. Install the vacuum brake booster check valve to the hose.
  3. Install the vacuum brake booster hose clamp to the check valve.
  4. Install the vacuum brake booster check valve to the vacuum brake booster.
scientia non olet · About LEMON Manuals