LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Seat Belts) >> Repair Instructions >> Seat Belt Buckle and Latch Replacement - No. 2 Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Handle Mounting Screws
    GM768627Courtesy of GENERAL MOTORS CORP.
  1. Remove the handle mounting screws (1).
  2. Partially remove the seat cushion cover by separating the cushion trim J-strips.
    3. Fig 2: View Of No. 2 Rear Seat Belt Buckle (60/40 Split - 50/50 Split)
    GM768629Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts attaching the buckle to the seat cushion frame.
  4. Remove the buckle from the seat frame.
scientia non olet · About LEMON Manuals