Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement (Cadillac)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Front Seat Back Cushion Finish Panel Tip: Using a nylon flat-bladed tool push the tabs in on the side of the panel to release from the seat back to remove. |
| 2 | Front Seat Back Blower Push in Retainer |
| 3 | Front Seat Back Blower Rivet (Qty: 2) Tip: Drill out the old rivets and install new rivets when replacing the blower assembly. |
| 4 | Front Seat Back Blower Assembly Tip: Disconnect the electrical connector. |