Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

In order to equalize wear, rotate the tires at the specified intervals. Refer to Maintenance Schedule (North American Emissions) . In addition to scheduled rotation, rotate the tire and wheel assemblies whenever you notice uneven tire wear.

Radial tires tend to wear faster in the shoulder area, particularly in front positions, due to design. Radial tires in non-drive locations may develop an irregular wear pattern that can generate tire noise. This especially makes regular tire rotation necessary.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the center caps from the wheels, if equipped.
Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .

Fig 1: Tire Rotation Sequence (4 Tires)

Courtesy of GENERAL MOTORS CORP.

Rotate the 4 wheels and tires as shown.