LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Tires And Wheels) >> Repair Instructions >> Tire Rotation >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  2. Install the center caps, if equipped.
  3. Lower the vehicle.
  4. Check the tire pressure. Refer to the tire placard and adjust the tire pressure as necessary.
  5. Perform the tire pressure sensor learn procedure, if equipped. Refer to Tire Pressure Sensor Learn .
scientia non olet · About LEMON Manuals