LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Opening the Midgate When There Is an Electrical Failure >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the midgate.
  2. Check for proper operation of the midgate latch system.
  3. Install the midgate window sealing strip. Refer to Midgate Window Outer Sealing Strip Replacement .
  4. Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .
scientia non olet · About LEMON Manuals