LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Midgate Striker Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the midgate window to the full open/down position.
  2. Open the midgate.
  3. Fig 1: Midgate Latch Striker
    GM1486515Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws retaining the midgate latch striker to the body.
  5. Remove the midgate latch striker and shim (if equipped) from the pillar.