LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Liftgate Lock Striker Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the liftgate door sill plate. Refer to Liftgate Door Sill Plate Replacement .
  3. Mark the location of the striker with a grease pencil.
    4. Fig 1: Liftgate Lock Striker
    GM870174Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Using a grease pencil, mark the strikers location prior to removal.
  4. Remove fasteners from the striker (1).
  5. Remove the striker and shims, if equipped, from the vehicle.
scientia non olet · About LEMON Manuals