LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Door Lock and Side Window Switch Replacement - Passenger >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Passenger Door Lock & Side Window Switch
    GM931228Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the door lock and side window switch.
  2. Align the switch with the opening in the door panel. Press to seat the switch.
  3. Program the keyless entry transmitters if the module has been replaced. Refer to Transmitter Programming .
  4. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals