LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Door Lock and Side Window Switch Replacement - Driver >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Driver Door Lock & Side Window Switch
    GM833446Courtesy of GENERAL MOTORS CORP.
  1. Install the driver door lock and side window switch to the connector.
  2. Align the driver door lock and side window switch with the opening in the door panel and press to seat the switch.
  3. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals