LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Door Lock Cylinder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outside door handle. Refer to Front Side Door Outside Handle Replacement .
  2. Fig 1: Door Lock Cylinder
    GM838825Courtesy of GENERAL MOTORS CORP.
  3. Remove the lock cylinder retainer (1).
  4. Remove the lock cylinder (2).