LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Door Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Door Lock Cylinder
    GM838825Courtesy of GENERAL MOTORS CORP.
  1. Ensure that the lock cylinder gasket (3) is in place before lock cylinder installation.
  2. Install the lock cylinder (2) into the door handle.
  3. Install the lock cylinder retainer (2), ensuring that the retainer is fully seated.
  4. Install the outside door handle. Refer to Front Side Door Outside Handle Replacement .
scientia non olet · About LEMON Manuals