LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Access) >> Repair Instructions >> Cargo Box Stowage Box Lid Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cargo Box Stowage Lid
    GM1486516Courtesy of GENERAL MOTORS CORP.
  1. Install the lock cylinder to the stowage lid.
  2. Secure the retention clip (1) to the lock cylinder (2).
  3. Position the lock arm to the cylinder and install the snap clip (3).
  4. Unlock the lock cylinder with the key.
  5. Position the stowage lid to the stowage compartment.
  6. Lock the lock cylinder.
  7. Remove the key.
scientia non olet · About LEMON Manuals