Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Rear Door Lock/Unlock | Miscellaneous Test | The BCM actuates the door lock relay and liftgate lock when you select Lock. Rear doors and liftgate should lock. The BCM actuates the door unlock relay when you select Unlock. Rear doors and liftgate should unlock. |
Driver Door Module and Passenger Door Module
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Window Up/Down | Output Control | The DDM or PDM will command the window up and down |
| Door Lock/Unlock Test | Output Control | The DDM or PDM will command the door lock actuator to lock or unlock |
| Passenger Window Lockout Indicator | Output Control | The DDM will command the window lockout indicator on when you select ON and turn it off when you select OFF |