LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Engine Control System & Fuel - 4.8L, 5.3L, 6.0L, Or 6.2L - Introduction (2 Of 2)) >> Repair Instructions >> Plastic Collar Quick Connect Fitting Service >> Connect Procedure

Connect Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lubricating Male Pipe End
    GM155425Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fuel Pipe Fitting Caution .
  1. Apply a few drops of clean engine oil to the male connection end.
    2. Fig 2: Connecting Quick-Connect Fittings
    GM21855Courtesy of GENERAL MOTORS CORP.
  2. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
    3. Fig 3: View Of Quick-Connect Fitting
    GM155399Courtesy of GENERAL MOTORS CORP.
  3. Once installed, pull on both sides of the connection in order to make sure the connection is secure.
scientia non olet · About LEMON Manuals