Fuel Tank Filler Pipe Replacement (1500 Series): Assemble
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Evaporative emission hose clamp (10)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
- Evaporative emission hose (9)
- Fuel tank fill hose clamp (8)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
- Fuel tank fill hose (7)
- Fuel tank fill hose clamp (6)
Tighten: Tighten the clamp to 2.5 N.m (22 lb in).
- Fuel tank fill pipe clip (5)
- Fuel tank fill hose (4)
- Fuel tank fill pipe housing (3)
- Fuel tank fill pipe housing bolts (2)
Tighten: Tighten the bolts to 2.3 N.m (20 lb in).
- Fuel tank filler vent hose (1)
NOTE:
Refer to Fastener Notice
.