Rear Wheelhouse Panel Liner Replacement (RPO HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Wheelhouse Liner, Screws & Retainers

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Rear Wheelhouse Panel Liner Screw (Qty: 6) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Rear Wheelhouse Panel Liner Plastic Retainer (Qty: 4)
3	Rear Wheelhouse Panel Liner Tip: Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the rear wheelhouse panel liner.