LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Frame And Underbody) >> Repair Instructions >> Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pan Skid Plate & Bolts
    GM1698082Courtesy of GENERAL MOTORS CORP.
  1. Position the oil skid plate on the frame.
  2. Install the oil skid plate mounting bolts.
    NOTE: Refer to Fastener Notice .

    Tighten:  Tighten the bolts to 28 N.m (21 lb ft).

scientia non olet · About LEMON Manuals