LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Replacement (Non-HP2)

Radiator Surge Tank Replacement (Non-HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Surge Tank (Non-HP2)
GM2042841Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1 Surge Tank Bolt
NOTE: Refer to Fastener Notice .

Tighten:  10 N.m (89 lb in)

2 Surge Tank Nut

Tighten:  10 N.m (89 lb in)

3 Surge Tank
Tip:  Remove the surge tank hoses from the surge tank.