LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)

Radiator Surge Tank Inlet Hose/Pipe Replacement (HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Surge Tank Inlet Hose/Pipe (HP2)
GM1967002Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedures: 
Partially drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
1 Radiator Surge Tank Inlet Hose/Pipe
Tip:  Using J 38185  reposition the radiator surge tank inlet hose/pipe clamps. See Special Tools .
Special Tools: 
J 38185  Surge Tank Inlet Hose/Pipe. See Special Tools .