LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (HP2)

Radiator Inlet Hose Replacement (HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radiator Inlet Hose (HP2)
GM1966736Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. If necessary, remove the air cleaner resonator duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1 Radiator Inlet Hose
Tip: 
  • Remove the radiator vent hose from the radiator inlet hose clips.
  • Using J 38185  reposition the radiator inlet hose clamps. See Special Tools .