LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Fan Replacement (Mechanical) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using Special Tools For Fan Clutch
    GM362333Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical) .
  2. Install the J 46406  to the fan clutch. See Special Tools .
    3. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS CORP.
  3. Remove the fan hub nut from the water pump in a counterclockwise rotation.
    4. Fig 3: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  4. Remove the fan clutch bolts from the rear of the fan blade.
  5. Separate the fan clutch from the fan blade.
scientia non olet · About LEMON Manuals