LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Engine Cooling Fan Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cooling Fan & Retainers
    GM1505516Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement (Non-HP2)  or Cooling Fan and Shroud Replacement (HP2) .
  2. Remove the cooling fan blade retainers.
  3. Remove the cooling fan blades.
scientia non olet · About LEMON Manuals