LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Lower Shroud Replacement (Mechanical) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Cooler Hose Clip At Lower Fan Shroud
    GM367017Courtesy of GENERAL MOTORS CORP.
  1. Remove the radiator. Refer to Radiator Replacement (Non-HP2)  or Radiator Replacement (HP2) .
  2. Disengage the two clips from the radiator.
  3. If equipped with engine oil cooler, remove the oil cooler hose clip from the lower fan shroud.
  4. Remove the shroud from the vehicle.
scientia non olet · About LEMON Manuals