LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Wiring Systems And Power Management - Service, Troubleshooting & Diagnosis) >> Splicing Copper Wire Using Splice Sleeves >> Tools Required

Tools Required

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

J-38125  Terminal Repair Kit. See Special Tools .

IMPORTANT: Use only duraseal splice sleeves. Other splice sleeves may not protect the splice from moisture or provide a good electrical connection.

Use duraseal splice sleeves to form a one-to-one splice on all types of insulation except tefzel and coaxial. Use duraseal splice sleeves where there is special requirements such as moisture sealing. Follow the instructions below in order to splice copper wire using duraseal splice sleeves.

Splice Sleeve Color Crimp Tool Nest Color Wire Gage AWG/(Metric)
Salmon
12089189
Red 20,18/(0.5, 0.8)
Blue
12089190
Blue 16, 14/(1.0, 2.0)
Yellow
12089191
Yellow 12, 10/(3.0, 5.0)
Green
88988379
Red (1) 0.22-0.35/(22-24)