Liftgate Outside Handle Replacement (Except Avalanche and EXT Escalade)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement . |
|
| 1 | Liftgate Handle Nuts (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | Liftgate Handle Assembly Tip: Disconnect the electrical connector. |