Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The ratchet, pawl, and sector switches are part of the liftgate latch assembly and are used by the liftgate module (LGM) to determine the state of the latch during the process of latching or unlatching. The ratchet and pawl switches will be inactive when the primary and secondary latches are latched, and the sector switch will be active during the power cinch function. Each of the latch switch signal circuits are supplied battery voltage through a resistor and monitored within the LGM. The latch switches share a common low reference circuit from the LGM and when the switch contacts close the signal circuit goes low and the LGM determines the switch to be active. The full open switch is a limit switch mounted on the gear motor assembly alongside the swing arm gear. The full open switch signal circuit is supplied battery voltage through a resistor and monitored within the LGM. When the liftgate reaches the full open position, the switch signal circuit is closed to the low reference circuit and the signal circuit voltage goes low.