Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe the operation of the power windows while commanding each window UP and DOWN by using their respective window switches, each window should perform the UP and DOWN function.
- If the driver window malfunctions, refer to Driver Window Malfunction .
- If the front passenger window malfunctions, refer to Passenger Window Malfunction .
- If either rear passenger power window malfunctions, refer to Rear Passenger Window Malfunction .
Observe the scan tool Driver RF Window Switch, Driver LR Window Switch and Driver RR Window Switch parameters while using the driver master control switches. The parameter should change between Off, Up, Down and Express Down.
- If the value does not change, replace the DDS.
Observe the scan tool Window Lockout Switch parameter while pressing and depressing the window lockout switch on the driver master control. The parameter should change between On and Off.
- If the value does not change, replace the DDS.