LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Tray Front Support & Bolts
    GM1702819Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the battery tray front support bolts.
  3. Remove the battery tray front support.
    4. Fig 2: View Of Battery Tray, Brackets & Nuts
    GM1702822Courtesy of GENERAL MOTORS CORP.
  4. Remove the nut securing the battery tray to the front fender inner panel.
  5. Remove the 3 nuts securing the battery tray to the battery tray bracket.
  6. Remove the battery tray from the vehicle.
scientia non olet · About LEMON Manuals