LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> Starter Motor Noise Diagnosis >> Circuit/System Testing

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flywheel inspection cover.
  2. Inspect the flywheel for the following:
    • Loose flywheel bolts
    • Chipped gear teeth
    • Missing gear teeth
    • Bent flywheel
    • Debris in the bell housing
    • If not within specifications, remove the debris, tighten the flywheel bolts, or repair or replace the flywheel.
  3. If all inspections were within specification, replace the starter motor.
scientia non olet · About LEMON Manuals