Transmission General Specifications
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Transmission General Specifications
| Name | Hydra-matic 4L65-E |
|---|---|
| RPO Codes | M32 |
| Production Location | Toledo, Ohio |
| Vehicle Platform, Engine/Transmission, Usage | N Truck (H2) |
| Transmission Drive | Longitudinally-Mounted Rear Wheel Drive |
| 1st Gear Ratio | 3.059:1 |
| 2nd Gear Ratio | 1.625:1 |
| 3rd Gear Ratio | 1.000:1 |
| 4th Gear Ratio | 0.696:1 |
| Reverse | 2.294:1 |
| Torque Converter Size, Diameter of Torque Converter Turbine | 300 mm |
| Pressure Taps | Line Pressure |
| Transmission Fluid Type | DEXRON® VI |
| Transmission Fluid Capacity, Approximate | 300 mm Converter Dry: 11.50 l (12.1 qt) |
| Transmission Type: 4 | Four Forward Gears |
| Transmission Type: L | Longitudinal Mount |
| Transmission Type: 65 | Product Series |
| Transmission Type: E | Electronic Controls |
| Position Quadrant | P, R, N, Overdrive (Circle D), D, 2, 1 P, R, N, Overdrive (Circle D), 3, 2, 1 |
| Case Material | Die Cast Aluminum |
| Transmission Weight Dry, Approximate | 300 mm Converter 85.57 kg (188.6 lbs) |
| Transmission Weight Wet, Approximate | 300 mm Converter 98.4 kg (218.0 lb) |
| Maximum Trailer Towing Capacity | 6 130 kg (13,500 lb) |