Installation Procedure
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Install the transmission fluid cooler hoses to the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement
- Install the cooling lines to the clips.
- Install the transmission fluid cooler hose insulator to the transmission.
- Install the bolts to the transmission fluid cooler hose insulator.
Tighten: Tighten the bolts to 17 N.m (12 lb ft).
- Lower the vehicle.
- Install the transmission fluid cooler hoses to the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement
- Install the transmission fluid cooler hose to the auxiliary transmission fluid cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement
- Install the auxiliary oil cooler to the vehicle.
- Install the bolts to the transmission fluid auxiliary cooler.
Tighten: Tighten the bolts to 17 N.m (12 lb ft).
- Install the transmission fluid cooler hoses to the transmission fluid Auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement .
- Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
NOTE:
Refer to Fastener Notice
.