LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Floor Shift Control Knob Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Floor Shift Control Knob
    GM896833Courtesy of GENERAL MOTORS CORP.
  1. Loosen the set screw (1).
  2. Pull up to remove the shift control knob (2) from the transmission control assembly.
scientia non olet · About LEMON Manuals