LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Input Sun Gear Bushings Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Input Sun Gear Front Bushing
    GM213042Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-4 which is part of kit J 34196-B  with J 8092  , install the input sun gear front bushing (657). See Special Tools .
  2. Using J 34196-6 which is part of kit J 34196-B  with J 8092  , install the input sun gear rear bushing (659). See Special Tools .