LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Input Carrier Inspection

Input Carrier Inspection

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Input Carrier Pinion End Play
    GM1265872Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Check end play on each pinion.
  1. Check the input carrier pinion end play. The end play must not exceed 0.61 mm (0.024 in).
  2. Inspect the input carrier for pinion gear damage, proper pin stake and keystoned pinion gears. Pinions must rotate freely.