LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Forward Clutch Sprag Disassemble

Forward Clutch Sprag Disassemble

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Overrun Clutch
    GM213055Courtesy of GENERAL MOTORS CORP.
  1. Remove the overrun clutch hub retaining snap ring (638).
  2. Remove the overrun clutch hub (639).
  3. Remove the forward sprag clutch inner race and input sun gear assembly (640).
    4. Fig 2: View Of Sprag Assembly Retainer Rings
    GM8204Courtesy of GENERAL MOTORS CORP.
  4. Remove the sprag assembly retainer rings (643).
  5. Remove the forward sprag assembly from the forward clutch outer race (644).
scientia non olet · About LEMON Manuals