LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Forward Clutch Piston Travel Check

Forward Clutch Piston Travel Check

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Measuring Forward Clutch Plate Travel
    GM57149Courtesy of GENERAL MOTORS CORP.
  1. Use feeler gauges to check the forward clutch plate travel. Check travel between the forward clutch backing plate retainer ring (651) and the forward clutch selective backing plate (650).

    The forward clutch plate travel should be:

    Specification:  0.876-1.866 mm (0.034-0.073 in)

  2. Select the proper forward clutch selective backing plate (650) to obtain the correct travel. Refer to Forward Clutch Backing Plate Selection .
scientia non olet · About LEMON Manuals