LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> 2-4 Band, Input Clutches, Input Gear Set Removal

2-4 Band, Input Clutches, Input Gear Set Removal

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Band Anchor Pin
    GM1552920Courtesy of GENERAL MOTORS CORP.
  1. Remove the band anchor pin (41).
    2. Fig 2: Input Housing & Shaft Assembly & Reverse Input Clutch Housing & Drum Assembly
    GM1552921Courtesy of GENERAL MOTORS CORP.
  2. Remove the input housing and shaft assembly (621), along with the reverse input clutch housing and drum assembly (605).
    3. Fig 3: View Of 2-4 Band Assembly
    GM190436Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2-4 band assembly (602).
scientia non olet · About LEMON Manuals